Ovens

Ovens are widely used for drying, warming, sterilization, melting, baking various sub-products, parts, substances or final products and they must maintain the specified temperature.The XpertVal is a thermocouple-based thermal validation system that is suitable to handle the high temperatures typically encountered in ovens. The technology has the capability to record temperature data for up to 120 test points in real-time.For oven temperatures below 140°C, GMP temperature loggers provide a higher accuracy of 0.1°C and easier installation that reduces labor cost. The GMP RF temperature loggers add real-time wireless data capabilities.Both systems are supported by the XpertLog software® which our customers rely upon for their most critical applications.

Temperature data logger low profile with flexible sensor

Black cylindrical electronic device connected to a coiled white cable with a gray tip, reflected on a glossy white surface.

Standard data logger GMP F LP

Standard data logger GMP F LP

Real time wireless temperature data logger low profile with flexible sensor

Black round device with a coiled white cord and a metallic tip on a reflective surface.

wireless data logger GMP RF F LP

High temperature real time wireless data logger with 5 flexible sensors

White rectangular real-time high temperature datalogger with yellow cords and metal clasps on a reflective surface.

wireless data logger GMP RF 5F HT

Autoclaves

Autoclaves are essential for the Life Sciences Industry. The validation of sterilization cycles is critical to ensure sterility of product, components and instruments, among others. Wireless dataloggers are the best autoclave validation technology available today. Lives International’s XpertLog® wireless data loggers optimize the calibration and setup processes. They can also reduce by half the amount of labor needed to execute a validation cycle. These loggers feature 4-wire PT-100 sensors accurate to 0.1°C that significantly reduce the measurement uncertainty and improve the calculation of accumulated lethality, or F-value,over that of thermocouple-based systems. The XpertLog® software calculates the accumulated lethality delivered in a cycle and compares results to acceptance criteria easily configured following applicable standards such as EN 285 and ISO 17665 to produce a pass or fail result. This reduces human error in the interpretation of results and ensures data integrity.The presence of saturated steam is crucial to ensure the efficacy of a moist heat sterilization cycle. When a XpertLog® pressure logger is used, our software can calculate and report whether the steam used in a sterilization cycle achieved saturation.Lives International offers a wide range of dataloggers and accessories to suit your specific autoclave validation needs. Contact us today to assist you with the best solution for your thermal validation needs.

temperature data logger with flexible sensor

Coil antenna device with a black cylindrical base and a silver wire coiled in a spiral shape extending upward.

standard data logger GMP F

Temperature data logger low profile with flexible sensor

Black cylindrical electronic device connected to a coiled white cable with a gray tip, reflected on a glossy white surface.

standard data logger gMP F LP

stopper washer temperature data logger with rigid sensor

Black cylindrical object with a smaller cylinder on top and several circular holes and a vertical slit on its top surface.

standard data logger GMP SW

temperature data logger with rigid sensor

Black cylindrical device with four metallic buttons on top and a small vertical antenna-like rod.

standard data logger GMP

temperature and pressure data logger with rigid sensor

Black robotic arm with cylindrical base and thin vertical rod on a reflective white surface.

standard data logger GMP TP

temperature and pressure data logger with flexible sensor

Black cylindrical electronic component with a coiled silver wire on top, reflected on a glossy surface.

standard data logger GMP TP F

real time wireless temperature data logger with flexible sensor

Coil antenna mounted on a dark cylindrical base against a light background.

wireless data logger gMP RF F

real time wireless data logger low profile with flexible sensor

Black round device with a coiled white cord and a metallic tip on a reflective surface.

wireless data logger gMP RF F LP

real time wireless temperature data logger with 5 flexible sensors

Black cylindrical device with five vertical connectors each holding a coiled grey cable with a silver tip.

wireless data logger GMP RF 5F

High temperature real time wireless temperature data logger with 5 flexible sensors

White rectangular real-time high temperature datalogger with yellow cords and metal clasps on a reflective surface.

wireless data logger GMP RF 5F HT

real time wireless temperature data logger with flexible sensor

Cylindrical sensor device with a black top and a blue twisted cable extending from it.

wireless data logger GMP RF F 10RA

real time wireless temperature data logger with flexible sensor

Black cylindrical container with a screw-on lid connected to a blue twisted cable ending in a small rectangular sensor.

wireless data logger GMP RF F 30H

real time wireless temperature data logger with rigid sensor

Black cylindrical buoy with a smaller cylinder on top and a vertical pole extending upward.

wireless data logger gMP RF

real time temperature and pressure data logger with rigid sensor

Black cylindrical device with a vertical silver antenna and a round top connector.

wireless data logger gMP RF TP

real time temperature and pressure data logger with flexible sensor

Black cylindrical device with a coiled silver metal tube extending from its top.

wireless data logger gMP RF TP F

matryoshka real time temperature data logger with flexible sensor

Modern black and white hanging pendant light with coiled silver cord.

wireless data logger GMP RF F MTR